Trang chủ > Bộ dò vòng từ phát hiện xe > FLUX 11 – Vehicle loop detector

FLUX 11 – Vehicle loop detector

FLUX 11 – 11-PIN PLUG-IN INDUCTIVE-LOOP VEHICLE DETECTOR

The FLUX 11 is a single-channel, 11-pin plug-in highly sensitive inductive-loop detector designed for vehicle detection applications, and interfaces seamlessly with the standard loop detector 11-pin bases found in the majority of traffic control systems. This loop detector is responsive, highly sensitive, and utilises sophisticated software algorithms which adapt to prevent false triggering due to changing environmental conditions. Easy-to-use dipswitches, as well as visual and audible feedback of inductive loop operation, ensure a hassle-free installation experience. Provision is made for both a Pulse and a Presence output, enabling the installer to connect a free-exit as well as a closing (or safety) loop using a single loop detector base. In addition, the FLUX 11 inductive loop detector is available in both a low-voltage, energy efficient 12V DC variant as well as a powerful 230V AC model, making it an extremely versatile access control solution and eliminating the need for expensive transformers or time-consuming rewiring.

MAIN FEATURES:

Very fast detection speed for quick response times.
Detection filter and high-level circuit and loop protection provides excellent immunity to interference from external sources for improved reliability.
Easy to install and commission saving you time and money.
Audible and visual diagnostics for ease of setup and maintenance.
Removable terminals for quick and easy maintenance.
Boot-loader interface for ease of firmware upgrades.
Dedicated reset button to assist with quick maintenance procedures.
Wide, adaptive self-tuning range for outstanding reliability.
Excellent, strong loop field strength for reliable operation.
Selectable Permanent Presence feature to prevent unintended barrier or gate closure.
Automatic Sensitivity Boost feature which boosts the sensitivity automatically for the reliable detection of vehicles of various heights.
Available in both 12V DC and 230V AC models.
Standardised size allows for usage with any existing 11-pin connector base.

FLUX 11 TECHNICAL DATA:

	12V DC MODEL	230V AC MODEL
Supply Voltage	10 – 40V DC, or 7 – 28V AC	220V – 240V AC +/- 10% 50Hz
Standby Current	50mA	<10mA
Output Relay Rating	1A @ 125V AC	1A @ 125V AC
Detection Time	4ms @100kHz loop frequency 10ms @ 40kHz loop frequency	4ms @100kHz loop frequency 10ms @ 40kHz loop frequency
Visual LED Indicators	LED indicators showing: Power; Loop Fault; Loop detection level (five LEDs); Detect	LED indicators showing: Power; Loop Fault; Loop detection level (five LEDs); Detect
Audible Indicators	Buzzer with indication of loop detection level and loop fault	Buzzer with indication of loop detection level and loop fault
Weight	92g	182g
Detector Tuning Range	15 – 1500μH	15 – 1500μH
Electronics Protection	Isolation transformer with 10kA lightning protection	Isolation transformer with 10kA lightning protection
Dimensions	96mm (length) X 42mm (width) X 80mm (height)	96mm (length) X 42mm (width) X 80mm (height)
IP Rating	IP 50	IP 50